The LBR II power supply is designed to control and regulate up to 35 inset or elevated LED lights. Brightness regulation is in accordance with the ICAO Annex 14 Vol II.
This system is “plug&play” just connect the input power (230V) and connect the output (4×2.5mm2) to the lights circuit. Once connected, it will immediately work.
In case of power supply or regulator failure, a dry contact relay will switch to alarm mode. Brightness regulation can be easily operated using a 4 position switch.
This system allow to obtain all necessary feature on the Helipad using a simple and small sized power supply. The LBR II is designed to be installed directly on a electrical panel or in a independent box.
Features
Smart system with alarm relay for faults.
This intelligent system features a built-in alarm relay that immediately signals in case of faults, ensuring proactive monitoring and enhanced operational safety.
Simple, cost-effective solution — plug, press, perform.
A straightforward, cost-controlled solution: just connect the 110–240V input, four buttons, and the output — and it works immediately, hassle-free.
Reliable digital control with open protocol.
The system offers reliable digital control of connected devices using an open, robust protocol and standard cabling for easy integration and operation.
Technical
Design | Power supply – Dimming module |
|---|---|
Input | 110-240VAC |
Dimensions | Din Rail: Height: 180mm Lenght: 250mm |
Use | Power supply, Dimming controller |
Compliance | ICAO Annex 14 |
Power | 480W |
Catalogue
